A1-A1 Mini Ring Camera Mounts

Added New Angled Design to Version 3!! In Version 3, I modified the threaded version of this mount to angle the camera downwards. This new iteration does require more supports but they should snap off pretty easily if you take your time. Be extra careful when pulling supports off of the threads. As before, I would suggest printing in PETG. I would also recommend spraying some PTFE/teflon spray or other light oil or lubricant on the threads to make them smoother. In Version 2, I redesigned the socket to use a threaded nut and base. There should be no risk of damage when installing the mount as you need only screw the retaining ring on a few threads then insert the camera and tighten the nut and position the camera as needed. Only downside to the updated version is that you aren't able to angle the camera downwards as far as you can in version 1. This mount has been adapted to fit the Ring Indoor Camera. You will have to take the base off of the camera so that only the ball is attach