A1 custom gcode prevent oozing V4

new A1 end G-code click here 👈👈👈 V4 2024-07-15 1- fix z axis hit the top , now when you start a print z go down first -90 then up +90 you must have 90mm of clearance under the nozzle otherwise the nozzle will hit the bed 2- lower the z-motor current in case of collision because when you home the printer it will go up 90mm by default and cannot be changed with gcode even if you're nozzle at maximum height it will be fine V3 2024-07-14 1- fix z axis hit the top @Ogram92 , now when you start a print z go down first -25 then up +25 you must have 25mm of clearance under the nozzle 2- before the waste was 105mm now 95mm for cleaner nozzle and no oozing 3- added 5 seconds before throwing the poop to make sure the temperature at 170c and no oozing V2.1 2024-07-13 delete extra wipe V2 2024-07-12 now it work with or without auto flow dynamics calibration V1 2024-07-08 only work with auto flow dynamics calibration A1 custom gcode to prevent