A1 dryer box interface adapter

Due to the high humidity, the material wire needs to be closed by the drying box, the Teflon tube leading out of the material wire can not be fixed on the outer receiving port, so I made a connector with a M6 threaded straight-through, fixing the 4mm Teflon tube while isolating the material wire from the air and dust to a certain extent. After feeding the wire, the Teflon tube can be easily inserted into the feedthrough. Pressing the washer on the feedthrough, it is easy to pull out the Teflon tube and back out the material. Of course, without this connector, it's not a big deal to have a section of the wire exposed, it's just not neat and comfortable :) Please feel free to let me know if you have any problems, I'll do my best to improve it, hope it works for you. Translated with DeepL.com (free version)