A1 enclosure attachment

This is an attachment for creating an A1 enclosure.It cannot be completed with just the printed material, so you will need the following:- Two 9mm x 9mm x 810mm wooden bars- Four 9mm x 9mm x 410mm wooden bars- 450mm x 840mm Styrofoam board-1000mm x 1800mm plastic sheet (side shielding)-1000mm x 900mm plastic sheet (front shielding)-Four Cable ties with a width of ７ mm or less-15mm wide double-sided tape Assembly1. First, secure the printed image of the first plate to the frame using cable ties. (The image shows two, but you should only need one.)2. Attach the vinyl sheet to the Styrofoam board using double-sided tape.3. Using the image as a reference, assemble the wooden frame.4. Place the wooden frame into 1, then insert the U-shaped piece and secure it with the rod.5. Place 2 on top and you're done. (If necessary, secure the styrofoam board and wooden frame with cable ties.)---------------------------------------------↓japaneseこれはA1用のエンクロージャーを作成するためのアタッチメントです。印刷物だけでは完成できませんので、以下の