A1 Mini Cable- and Filament-guide

A simple to use cable- and filament guide for the Bambu Lab A1-mini. When i got the great A1-mini the first thing that irritates me was the flapping cable to the hotend and the possible risk it hangs itself at the top of the Z-beam. Also the filament tube was not stable enough, could get before or behind that vertical Z-bar.As last but not least the tube connection at the spool-side is for some reason not fixed, which is not preferable. A moving connector does unwind your spool when the X-axis comes down. A fixed connector keeps the filament on the spool in place when you travel up or down over the Z-axisSo both the cable and the tube are guided via this top. The cable follows its natural path and runs along the back of the Z-bar. It has enough freedom to follow the whole path of the hot-end, without any tension (see gif). The filament fixture gives the filament a smoother path than the original coupler.The top-part:The top comes in a flat and a rounded model. I prefer the flat top, it