MakerWorld
3D Printer Accessories
Model downloaden
A1 mini enclosure (with plexi)
273
Downloads
290
Likes
72
Makes
I've released an updated version of this design. Please check it out!(click photo) Made this enclosure for my A1 mini since it sits inside a garage which gets dusty. The model uses plexi panels, so it comes with an additional costs, but I found it worth since it looks a bit cleaner and has the option to swap when something is broken - no huge printing. This was all printed with basic PLA. I had 3 sizes for the panels. One for the sides, one for the front and one for the door. Below you find the measurements.Thickness of the plexi panels: 3mm4x Side panels: 50 x 50 cm (500 x 500mm)1x Front panel: 50 x 50 cm (500 x 500mm) with a 35 x 35 cm (350 x 350 mm) cut out with an offset on the X-axis of 25 cm (250 mm) and Y-axis 22,5 cm (225 mm)1x Door: 30 x 30 cm (300 x 300mm) Assembly Print all the pieces you need / wantPut everything in place and mark the holesUse an 3mm drill to make the holes. ! Use something underneath and don't use a lot a force since it can break !Remount the piece
rafbanaan publiceert ook op
2 extra modellen op 2 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!