A1 mini Feed Through Manifold

这是个三通，本以为外挂料口与ams lite的其中一个料口共用一个进料孔，这就不用拔管拔来拔去从而节省时间 更新日志：第一次更新增加了带辅助夹的版本第二次更新优化带辅助夹优化版v2，多了个辅助夹，便于更加稳定，这个三通仅支持5色打印。优化了下内部结构，内部孔径微调增大没辅助夹的三通可以用2个扩展达成6色打印由于z缝会凸起，建议削掉再使用温馨提示：由于fdm工艺层高层纹影响，头料弯曲小不受影响，尾料弯曲大会增加摩擦力，会有一定的卡料概率 This is a three-way valve. I thought that the external feeding port and one of the AMS Lite feeding ports would share the same feeding hole, so there was no need to pull the tube back and forth to save time Update log:First updateAdded auxiliary clipSecond updateOptimized version with auxiliary clip, with an additional clip for greater stability. This tee only supports 5-color printing.Optimized the internal structure and fine tuned the internal aperture to increase itA three-way connector without a clip can achieve 6-color printing with 2 extensionsDue to the raised Z-seam, it is recommended to polish it before useReminder: Due to the influence of high grain patterns in the FDM process layer, the bending of the head material is not affected, while the bending of the ta