A1 Mini - Front ON OFF Switch (Optimized)

THE DESIGNER The original design was made by @simon.rob and can be found here , including assembly instructions if needed. However read my description here before assembling everything. YOU NEED PLA in one or more colors the hex wrench[es] that come with the printer [optional] one little screw from the “Heatbed nozzle wiper - A1 Mini” set or a similar screw [optional] thin double sided tape (see for yourself if you want to additionally fixate the non moving parts of the mechanism to the printer. Fixating the lower part of the piece that gets screwed to the spool holder part may help with the reliability of the mechanism, but I hadn't problems without it yet.) [optional] thin fabric (a thin mircofiber cloth / glasses cloth) that you can cut to little pieces and glue with thin double sided adhesive tape to the underside of the button switch part. This may help to prevent scratching your printer exterior in the long run. WHAT I CHANGED I redesigned the button and everything else that woul