A1 Mini Gridfinity Mounting Brackets

Bracket to attach a Gridfinity base to an A1 Mini. Requires 16 6x3mm magnets (they about $10/100 on Amazon) and some 3M 10mm wide by 1mm thick double sided tape. The magnets are press fit and are best added while the print is still warm as they will be quite hard to insert once it cools. Be sure to get them the right way round! Alternatively, instead of magnets, 2.9mm holes are included that will accept an M3 screw (M3x3 or M3x4) Caution the height clearance is very tight, you can put a 3u Gridf