A1 Mini Rotatable Top Spool Holder

这是一个比较节省占地空间的顶部耗材支架，除了本文件内的3个零件外，你还需要打印作者“达文西”制作的A1Mini版外挂耗材支架。https://makerworld.com/zh/models/119707#profileId-128773注意，轴心和轴帽必须打印本文件内的。注意事项：文件内的轴心必须是是平放着打印，这样才能获得足够的强度，除非你对你的耗材性能非常有信心，否则我不建议竖着打印。在安装顶部支架时我建议先装靠后的单个螺丝，然后把支架卡进滑轨再安装其他两个螺丝。 This is a relatively space-saving top consumable bracket, in addition to the 3 parts in this document, you also need to print the A1Mini version of the external consumable bracket made by the author "达文西".https://makerworld.com/zh/models/119707#profileId-128773Note that the shaft and shaft cap must be printed in this document.Note: The axis in the document must be printed flat to obtain sufficient strength, unless you are very confident in the performance of your consumables, I do not recommend printing vertically.When installing the top bracket, I recommend installing the single screw at the back first, then clamping the bracket into the slide rail and installing the other two screws.