A1 Series Modular Hotend Rack

Another Hotend Rack for the A1 Series printersA pair of buried* 5mm dia x 1mm magnets help securely hold against the hotend magnetic strip while a pair of 8mm x 2mm magnets on each of the two sides allow the number of holders in the rack expand as the number of hotends needing to be held grows. *There's a pause at slice 8.80 to install the two magnets, make sure the orientation (N/S) matches the hot end. So far all 8 of my hot ends have the same orientation so here's hoping they are all the same. I also made a few sets using really short #10 screws buried and the magnet on the hotend hold probably good enough but obviously these with the buried magnets hold better.