A300 Outlander Shell Catcher

Designed to catch the spent shell in a Beretta A300 Outlander 12 gauge model. Clips onto the ejection port and loading port underneath to cause hulls tro “stovepipe” rather than hitting the next shooter on the trap line. Hull is then removed by sliding fore or aft to clear the catcher. I printed in PETG with 50% infill (probably overkill but it uses very little filament and is quick to print) for strength and durability. Catcher may occasionally pop off, especially with faster shells, so I have had success shimming with painters tape as shown for additional friction. Double-sided tape is even better. Please note this was developed for the A300 OUTLANDER model and will not fit the A300 Ultima or other models as configured because the receivers are different.