AALIYAH HUEFORGE

Project: aaliyah tommy.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 158.2x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Matte Latte Brown Transmission Distance: 2 PLA+ Sunlu Silver Transmission Distance: 2 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Grey At layer #10 (0.88mm) swap to Red At layer #13 (1.12mm) swap to Dark Brown At layer #16 (1.36mm) swap to Latte Brown At layer #19 (1.6mm) swap to Silver At layer #21 (1.76mm) swap to Ice Blue At layer #23 (1.92mm) swap to