AAP01 KIT ARROWHEAD (AIRSOFT)

This is my second AAP01 kit. As the first one did, this kit solves most of the problems that you may find in other models from other creators, for example, the misalignment and tilt of the hop chamber and barrel has been fixed, and the print marks have been brought to a minimum. This has been done by having to embed the barrel in the exit hole of the front thread, forcing the barrel to maintain a straight trajectory. The kit includes: Frontal Receiver Muzzle Loading lever Front sight Hardware needed: 2 M3x5mm (For the front shight) 1 M5x15mm (For the charging handle) If you find any errors, do not hesitate to contact me and I will try to solve them as soon as possible. UPDATE 07/02/2025: - The holes for the rear sight have been updated, so now you can install an M3x4x3mm insert to have better resistance on the rear part. If you want to sell prints of this model, please, contact me. I recommend using PLA because the piece has been engineered thinking in printing with that material. But you could try with any other. Supports: Normal Everywhere 70% angle Infills: - Frontal -> 40% - Receiver -> 70% - Muzzle -> 30% - Loading Lever -> 35% - Front sight -> Solid Printing positions: You can print them any way you like.