Thingiverse
Abarth Keyring
door AzaPattaz
13
Downloads
25
Likes
0
Makes
Abarth Logo Keyring/Keychain
=======================
Printed with eSun Grey PLA+ & Creality White PLA
210c Nozzle & 50c bed
A small keyring is required to attach it to your main keyring. This is to reduce strain on the hole and prevent breakage.
To print in two colours, add a pause in the print around layer 21 if using 0.2mm layer height. Swap your filament and resume print. The layer number may differ depending on slicer settings so double check this before you print.
Happy Printing!
=======================
Printed with eSun Grey PLA+ & Creality White PLA
210c Nozzle & 50c bed
A small keyring is required to attach it to your main keyring. This is to reduce strain on the hole and prevent breakage.
To print in two colours, add a pause in the print around layer 21 if using 0.2mm layer height. Swap your filament and resume print. The layer number may differ depending on slicer settings so double check this before you print.
Happy Printing!
AzaPattaz publiceert ook op
2 extra modellen op 2 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
