Thingiverse
ABB IRB 120 Robot Model
von sippey
55
Downloads
65
Likes
0
Makes
Links of the robot are connected by magnets and rotate freely. Joint 6 is removed to give space for a magnet for mounting end-effector.
Model derived from stl found in a [ROS repo](https://github.com/ros-industrial/abb_experimental) and edited with meshmixer and meshlab to add slots for magnets and simplified for printability.
Magnets spec
15x3, 12x3, 10x3, 8x3, 8x3 (mm) disk magnets, axially magnetized.
I bought mine [here](https://www.amazon.com/gp/product/B07D1QPN4N/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1)
Model derived from stl found in a [ROS repo](https://github.com/ros-industrial/abb_experimental) and edited with meshmixer and meshlab to add slots for magnets and simplified for printability.
Magnets spec
15x3, 12x3, 10x3, 8x3, 8x3 (mm) disk magnets, axially magnetized.
I bought mine [here](https://www.amazon.com/gp/product/B07D1QPN4N/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
