ABC-Cube Custom Tonie

This ABC-Cube is a custom Tonie figure for the Toniebox. It only works with the teddyCloud or teddyBench. You also need a compatible RFID tag that is accepted by the Toniebox (ICODE SLIX-L RF interface, ISO/IEC 15693, 13.56 MHz).You can find them for example here: https://shop.electricky.de/T-Box-Modding/SLIX-L-Toniebox-kompatible-RFID-Tags-durchsichtiger-Sticker-original-NXP.html In the center of the cube, there is a gap for the RFID sticker. The RFID tag needs a minimum distance of about 5mm from the Toniebox to be detected. The tag cannot be placed completely vertically, otherwise the Toniebox will not read it. It must be inclined at least 10-15 degrees. That's why the gap is rotated both vertically and horizontally, so the Toniebox can detect the tag regardless of which side of the cube is placed on top of the box.One side of the cube has also a gap for two 10x3mm magnets. The colored plates are printed separately and can be glued into the cube afterwards. Before gluing the pla