Ableton Push 2 USB-C Adapter

This is an adapter for the Ableton Push 2 in order to use it with the nowadays standard USB-C connector. The adapter consist of one DC jack and USB-B male connectors in order to connect to the Push 2, and two USB-C female connectors, one for data, to be connected to the computer, and one for power, to be connected to a Power Delivery compliant power supply or wall adapter.

This is only the adapter case, to complete the project you'll need:
- USB-B male connector
- DC jack male connector - 5.5mm outer diameter x 2.5mm inner diameter
- USB-C breakout board
- USB-C PD decoy board at 12V (rated for at least 1.25A)
- Wires and basic soldering skills

All of these components can be easly found on Aliexpress for cheap. As for the PD decoy board I used a cheap one based on the LP2721 integrated circuit, that can be found by searching for PDC004-PD boards. Remember to use a 12V one, that's important.

In order to fit the connectors inside the case I had to trim excess metal at the e