ACE 2 Pro Hydrometer Holder

This is a base for a temperature & humidity sensor, so that you can place it inside the ace unit. Slide the base into the transparent guide on the lid. The base appears to float and remains in place while opening or closing the lid Does not interfere with the flow of the filament Can also work as a standalone holder It is recommended to print with PETG or ASA filament, due to the temperatures that develop inside the ACE The best settings are integrated into the print file In 2 "flavors", depending on the size of the sensor Only 17g of material 18/05/2026 ADDED Φ43 v2.1 profile with better grabling, for placement in the 3rd spce of the ACE 2 Pro The grabler uses the logic of the Gordian knot pipe fastening system https://www.makeronline.com/en/model/Gordian%20Knot%20PTFE%20Tubes%20Fastening%20System/304874.html?trackModuleType=10 09/06/2026 ADDED Φ43 v3.1 HIGH TEMPS ASA profile. Placement above 3rd filament space of the ACE 2 Pro Works PERFECTLY on the ACE 2 Pro