Thingiverse
ad X
von alpinedrones
185
Downloads
119
Likes
5
Makes
Introducing the new alpinedrones X quadcopter. It's supposed to be a relatively light weight perfect X frame for 4" props and 1306 or 1804/1806 motors.
The built should be self-explanatory and done in a few hours. All components can be swapped to a new frame within minutes.
The FPV mount doubles as Mobuis/Runcam/808 mount.
my setup:
PDB with integrated 12V and 5V regulators
Naze32 running CF
D4Rii
sn20a ESCs running blheli
RCX1306 3100kv motors
eachine fpv combo (super cheap, but ok)
weight without battery: 198g
AUW with 1300mah 3S battery and 808 cam: 342g
UPDATE: 10.12.15: body_v2.stl minor modifications
UPDATE: 4.1.16: fpv_v4 and v5. identical mounts, just different ways to mount the cam. I recommend a vtx with an antenna cable. (edit 19.4.16: files deleted)
UPDATE: 22.2.16: 192 - 5" version. flight tested 5" prototype
(supposedly) FINAL UPDATE 19.4.: the last 4" and the 5" design seem to work really well, so there's not much left to change. two ne
The built should be self-explanatory and done in a few hours. All components can be swapped to a new frame within minutes.
The FPV mount doubles as Mobuis/Runcam/808 mount.
my setup:
PDB with integrated 12V and 5V regulators
Naze32 running CF
D4Rii
sn20a ESCs running blheli
RCX1306 3100kv motors
eachine fpv combo (super cheap, but ok)
weight without battery: 198g
AUW with 1300mah 3S battery and 808 cam: 342g
UPDATE: 10.12.15: body_v2.stl minor modifications
UPDATE: 4.1.16: fpv_v4 and v5. identical mounts, just different ways to mount the cam. I recommend a vtx with an antenna cable. (edit 19.4.16: files deleted)
UPDATE: 22.2.16: 192 - 5" version. flight tested 5" prototype
(supposedly) FINAL UPDATE 19.4.: the last 4" and the 5" design seem to work really well, so there's not much left to change. two ne
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
