Thingiverse
AD407 PRO + microphone arm
door radziosz
10
Downloads
9
Likes
1
Makes
My set Andonstar AD407 PRO microscope + MOZOS SB38 microphone arm.
Printed from PET-G and PLA material. Holes prepared for threading, which must be done on your own. Screws holding the microscope used from the kit purchased with the microscope. Holes for LED lamps should also be threaded by yourself. The power supply wires of the lamp should be soldered again, and the PCB mounted with M1 screws, they can be melted in with a soldering iron. All typical microphone arm with standard 5/8" thread should fit.
Links to microscope and arms to choose
https://pl.aliexpress.com/item/1005004936805104.html?spm=a2g0o.order_list.order_list_main.23.5d731c2413cbqp&gatewayAdapt=glo2pol
https://www.amazon.com/s?k=microphone+arm&crid=3LXRTIPVT9QTJ&sprefix=microphone+arm%2Caps%2C187&ref=nb_sb_noss_1
Printed from PET-G and PLA material. Holes prepared for threading, which must be done on your own. Screws holding the microscope used from the kit purchased with the microscope. Holes for LED lamps should also be threaded by yourself. The power supply wires of the lamp should be soldered again, and the PCB mounted with M1 screws, they can be melted in with a soldering iron. All typical microphone arm with standard 5/8" thread should fit.
Links to microscope and arms to choose
https://pl.aliexpress.com/item/1005004936805104.html?spm=a2g0o.order_list.order_list_main.23.5d731c2413cbqp&gatewayAdapt=glo2pol
https://www.amazon.com/s?k=microphone+arm&crid=3LXRTIPVT9QTJ&sprefix=microphone+arm%2Caps%2C187&ref=nb_sb_noss_1
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!