Thingiverse
Adapted Scri3d Stand + Spool
door emilport
4
Downloads
2
Likes
0
Makes
Printed on Bambu Lab P1P with PLA+.
Use support for the underside of the donut but block supports in the holes themselves.
Adapted from Scrib3D filament holder by rstegall. I only changed the top part to have two openings instead of one, because I wanted one opening to feed the filament itself.
rstegall used a stick to connect the parts but I used the inside of a bic 0.7 mechanical pencil. It was the perfect diameters so I cut it to size and attached it using gel gorilla super glue.
Use support for the underside of the donut but block supports in the holes themselves.
Adapted from Scrib3D filament holder by rstegall. I only changed the top part to have two openings instead of one, because I wanted one opening to feed the filament itself.
rstegall used a stick to connect the parts but I used the inside of a bic 0.7 mechanical pencil. It was the perfect diameters so I cut it to size and attached it using gel gorilla super glue.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
