Additional LED lighting for the Bambu A1 printer

The presented project involves additional lighting for the BAMBU A1 printer. It is mounted on the printer's upper beam, providing much better illumination of the work area than the original lamp.The design concept was based on using the cheapest LED strips available, priced under €1.50, and sized to fit the Bambu A1 printer. Another key consideration was eliminating the use of adhesive tape, which often failed in practice and came unglued at unexpected moments during printing. This resulted in a simple LED lamp housing design, where all components can be assembled very quickly and easily. The design is designed to fit a 270 mm long LED strip containing 13 light points with 10 mm lens diameters and a spacing of 21 mm.Assembly involves placing the LED strip (without removing the adhesive backing) into the printed part with holes, then inserting a flat pressure plate into the remaining slot. Finally, insert the entire assembly into the holes of the two hangers. If you like my project,