Slicer Discord
Adjustable 3D-Printed TV Arm Mount – 3D printable model from MakerWorld MakerWorld
Other House Models

Adjustable 3D-Printed TV Arm Mount

21 Downloads
41 Likes
0 Makes
Go to Model
A fully 3D-printed TV arm mount that allows you to pull your TV away from the wall and rotate it freely in multiple directions. Designed for strength, stiffness, and practicality — perfect for custom setups or compact spaces.The model includes slots for cable ties, so you can route your cables neatly through the arm.If the joints move too smoothly, use the included printed rings as spacers between the rotation points — this increases friction and keeps your TV in position.When the TV is not in use, make sure the arm is folded in against the wall to prevent long-term creep in the plastic.choose the material witch you think is best for your situation!!.Required hardware:8 × SKF 51202 bearings8 × SKF 61900 bearings2 × M10 × 90 bolts1 × M10 × 140 bolt1 × M10 × 130 bolt4 × M10 nuts16 × 5 × 60 wood screws25 × 5 × 40 wood screwsWooden arms (40 × 40 mm cross-section, length depends on TV size and desired reach)6 × M4 × 15 bolts6 × M4 nutsRecommended print settings:Infill: 15 %Wall count: 15 wa
Category
Other House Models
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA, Wood PLA
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection