Thingiverse
Adjustable Bicycle Pedal Hook Stand
par japinkerton
2
Téléchargements
10
Likes
0
Makes
# Details
- Stand for bikes without a kickstand. Just place pedal slightly behind its bottom position, and lean the pedal arm into the cradle.
- Adjustable height to perfectly fit any bike
- Ideal for garage storage
- Small version can be printed on pretty much any printer
- Large version can hold heavy/large bikes (I use mine for a 60lb E-bike)
- Customizable
https://github.com/japinkerton/Adjustable-Bicycle-Pedal-Hook-Stand
# Print Settings
- Typically can be printed out of PLA with no supports
- 0.2mm layer height is adequate, but smaller heights may make the adjustment more smooth
- 6 wall loops, and 5 top and bottom layers for strength
- 15% infill
- Recommended to lubricate threads with petroleum jelly, as they can be quite stiff
- Because of the large threads, print times can be quite long (>7 hours for the large version on my H2D)
[](https://buymeacoffee.com/mattowens)
- Stand for bikes without a kickstand. Just place pedal slightly behind its bottom position, and lean the pedal arm into the cradle.
- Adjustable height to perfectly fit any bike
- Ideal for garage storage
- Small version can be printed on pretty much any printer
- Large version can hold heavy/large bikes (I use mine for a 60lb E-bike)
- Customizable
https://github.com/japinkerton/Adjustable-Bicycle-Pedal-Hook-Stand
# Print Settings
- Typically can be printed out of PLA with no supports
- 0.2mm layer height is adequate, but smaller heights may make the adjustment more smooth
- 6 wall loops, and 5 top and bottom layers for strength
- 15% infill
- Recommended to lubricate threads with petroleum jelly, as they can be quite stiff
- Because of the large threads, print times can be quite long (>7 hours for the large version on my H2D)
[](https://buymeacoffee.com/mattowens)
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
