Thingiverse
Adjustable bracket for solar panels
door frankenkj03
2
Downloads
6
Likes
0
Makes
Print-In-Place adjustable bracket for solar panels.
There are fixed adjustment points at 35°, 45°, 60°, and 70° for the panel to be tilted to, the bracket will accommodate panels up to 0.8" thick.
Use a single bracket for small panels, or multiple brackets for larger/longer panels.
Can be easily folded flat for storage and transport.
Print with minimal tree support, and be careful when rotating the arms for the first time - slowly work the arms free, stressing the joints too quickly may snap the lower pivot point.
I printed in pla+ with 6 walls and 25% infill.
There are fixed adjustment points at 35°, 45°, 60°, and 70° for the panel to be tilted to, the bracket will accommodate panels up to 0.8" thick.
Use a single bracket for small panels, or multiple brackets for larger/longer panels.
Can be easily folded flat for storage and transport.
Print with minimal tree support, and be careful when rotating the arms for the first time - slowly work the arms free, stressing the joints too quickly may snap the lower pivot point.
I printed in pla+ with 6 walls and 25% infill.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!