Adjustable Caddx EOS Beta75x mount

I was asked to help redesign the Z02 camera mount that BetaFPV had for their camera to fit the EOS1/2 cameras, many iterations with lots of collaboration we have finally settled on a mount that fits under the canopy, holds the camera, is adjustable, and doesn't interfere with the VTX and still fits the beta75x.

If you want adjust the camera angle further down or further up you will need to mod the canopy a little as it is not designed for adjustable angles.
The easiest way I have found to do that was to take the shaft of a soldering iron moving it in a circle until the camera lens fits through then keep moving it in a half circle in the direction you need to elongate the hole up or down for the angle then let it cool and use an exacto knife to pop off the curled up plastic.

Here is the canopy that I designed to go with the camera mount.
https://www.thingiverse.com/thing:3137474


For best results print at 0.1mm - 0.15mm layer height and supports for the bottom.

Note: thi