Thingiverse
Adjustable Fume Extractor
by jurineru
19
Downloads
7
Likes
0
Makes
Soldering fumes is very dangerous for people to inhale so when someone is soldering electronics, a fume extractor should be used.
In this model, a PC 120mm Fan can be used. It is best to use one with a white LED to illuminate the parts that should be soldered. The main difference between this model from the commercial one is the adjustable fan height and angle. Also, this model is designed to work with 2 18650 batteries with a TP4056 Charger, an mt3608 buck booster, and a switch, which makes it portable. Moreover, the Carbon Filters (130mmx10mm) can be replaced with ease. This model uses minimal non-printed fasteners such as 4 sets bolt and nut (3mm dia, 12mm length), 3 screws( 3mm dia), and 8 PC Fan Screws. Models are split so that minimal supports are needed.
A duct hose adapter is added for those people who want to install a duct hose behind this device for extra safety.
In this model, a PC 120mm Fan can be used. It is best to use one with a white LED to illuminate the parts that should be soldered. The main difference between this model from the commercial one is the adjustable fan height and angle. Also, this model is designed to work with 2 18650 batteries with a TP4056 Charger, an mt3608 buck booster, and a switch, which makes it portable. Moreover, the Carbon Filters (130mmx10mm) can be replaced with ease. This model uses minimal non-printed fasteners such as 4 sets bolt and nut (3mm dia, 12mm length), 3 screws( 3mm dia), and 8 PC Fan Screws. Models are split so that minimal supports are needed.
A duct hose adapter is added for those people who want to install a duct hose behind this device for extra safety.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
