Slicer Discord
Adjustable graphic card support bracket LED light – 3D printable model from MakerWorld MakerWorld
Electronics

Adjustable graphic card support bracket LED light

28 Downloads
22 Likes
5 Makes
Go to Model
Video card support with LED lighting.Can be assembled in up to 5 colours due to the separate parts.The "window" is printed in transparent material on the front.Designed with a rubber disc for the bottom.The LED strip can be fixed to the inside with a double-sided adhesive strip.The rod can be snapped together, it does not need to be glued together, but it must be glued to the base.There are two versions of the horizontal adjustable bracket, please see the last picture.The rod can be used as you like with the led strip going in at the top or the bottom depending on how you rotate.14-15 cm LED strip is enough. Plus wire tot he motheroard.For the horizontal support it is recommended to allow the support because of the hole, otherwise it is not necessary.PETG is recommended, PLA is not
Category
Electronics
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
5 colors
Single piece 5 colors / AMS
Supports 1/3
Assembly 0/3
Settings 3/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA, PETG
Colors
5 (AMS/MMU recommended)
Post-processing
Gluing
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection