Adjustable iPad Air 2 mount

This is a free standing adjustable stand/mount for iPad Air 2. I needed something for GoToMeeting that didn't have the camera looking up my nose :-)

- The "ipad grabber" part should go on it's side with supports holding the mounting tab.

- The main arm needs support around the post that slides into the feet

- The base should print flat in it's natural position, no supports

- Print the small arm on one of the flat sides, it does not need any supports

- The knurled bolt (you need two) should print with the head flat on the print bed, post vertical, no supports. **It will thread in much easier if you scale the bolts to 99% on the X and Y axis (NOT the Z, you'll mis-align the threads).** If you don't do the scaling on the bolt, it will be a *very* tight fit and may be difficult to thread at all. You have been warned...

I didn't not find it necessary to put any supports in the circular openings (the holes the bolts fit in to), they printed just fine with PLA (and lik