Adjustable Livescope Pole

This is a custom Livescope pole that I designed and printed. This is the first version and may be changed as I keep using it. The pole I designed it for is listed below from Amazon. It extends from 1.5-3’. I’m from Se MN and we don’t get very thick ice typically. I already had the Gamin Pole, so I used the transducer mount that came with it on this design. I will probably update it to screw on to the top holes of the transducer eventually.

I uploaded an updated version of the tripod mount. The original was a little thin where the bolt goes through and was prone to cracking/breaking.

I used 4 walls and 20% infill with PETG. Most of the holes are for 1/4’ bolts because that’s what I have most of. Obviously stainless would be best. I believe the pole mount is attached with M3x1/2, but will have to verify.




Pole- https://www.amazon.com/dp/B08LL28XZW/ref=cm_sw_em_r_mt_dp_RK00QE6PT6JNKFQZPM20?_encoding=UTF8&psc=1