MakerWorld
Other Tools
Zum Modell
Adjustable PCB Stand
10
Downloads
1
Likes
0
Makes
This is a custom built PCB stand designed to aid with soldering and tinkering on PCBs. The maximum width that this model can handle is 150mm. Simply assemble as described below and adjust side screws to whatever size you need.Additional parts required for assembly:9 x M4 threaded inserts6 x M4x20mm3 x M4x12mm2 x 14mm diameter bearings (5mm bore, 5mm depth)Optional but recommended: 2 x M4 NutsQuantity of each file required to print:1 x Stand_Frame1 x Leg_Screw_Base1 x Leg_Screw1 x Rotator1 x Leg_Nut2 x Screw3 x Clamp_End4 x TPU_FootPart specific print instructions (0.2mm layer height recommended for all, PLA or PETG):Stand_Frame: >25% infill (higher infill increases strength), only tops of large side threads require supportse.g: TPU_Foot: print in TPU to increase friction and reduce slidingOther models: no specific requirementsAssembly1 - Print files off as stated previously2 - Place threaded inserts into all 4 TPU feet and screw M4x20mm bolt into the 4 respective holes on Stand_Frame,
tomd104_ veröffentlicht auch auf
7 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!