MakerWorld

Other House Models

Adjustable Phone Stand

by ARW · Other House Models

13 Downloads

4 Likes

0 Makes

Easily adjust the phone stand to be able to see your phone at any angle. No supports necessary, took about 2.5 hr at 90 mm/s, 2 perimeters, and 10% infill on an Ender 3. Print 2 of each file.

Category

Other House Models

Source

MakerWorld

Published

30.11.2024

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

2.5 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Adjustable Phone Stand need supports when printing?

No supports needed for Adjustable Phone Stand — it's designed to print clean off the bed.

How long does it take to print Adjustable Phone Stand?

According to the design notes, Adjustable Phone Stand takes approximately 2.5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Adjustable Phone Stand available in?

Adjustable Phone Stand is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Adjustable Phone Stand free to download?

Yes, Adjustable Phone Stand is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Adjustable Phone Stand

Similar Models

Add to Collection