Thingiverse
Adjustable Phone Stand
di Racoon_97
60
Download
66
Likes
0
Makes
This adjustable phone stand is one on of my fist projects with a 3D Printer.
The design was kept as simple as possible.
With a width of 80mm and a height of 90mm,
this phone stand is also suitable for large moblie phones such as the IPhone 8 Plus.
Content list:
-Part-1_base.stl
-Part-2_grip.stl
and
-Part-3_Phone-stand.stl
-Part-4_Phone-stand-clip.stl
or
-Part-5_complete.stl
You need to assemble Part-3 & Part-4 - this way you can save a lot of support structure.
If you choose the combination of Part-3 and Part-4 you have to pick up the
right size of Part-4 and glue them together with superglue.
With my setup, Part-3 and Part-4-13.60_x_12.60.stl fit together perfectly.
You should take a look at the thickness of your Phone:
Then you can choose from three different types of phone thicknesses:
10mm, 12mm and 15mm
What you need in addition:
-M5 nut
-M5 x 25 hex bolt
The M5 screw should have a length of at least 25mm.
Please share
The design was kept as simple as possible.
With a width of 80mm and a height of 90mm,
this phone stand is also suitable for large moblie phones such as the IPhone 8 Plus.
Content list:
-Part-1_base.stl
-Part-2_grip.stl
and
-Part-3_Phone-stand.stl
-Part-4_Phone-stand-clip.stl
or
-Part-5_complete.stl
You need to assemble Part-3 & Part-4 - this way you can save a lot of support structure.
If you choose the combination of Part-3 and Part-4 you have to pick up the
right size of Part-4 and glue them together with superglue.
With my setup, Part-3 and Part-4-13.60_x_12.60.stl fit together perfectly.
You should take a look at the thickness of your Phone:
Then you can choose from three different types of phone thicknesses:
10mm, 12mm and 15mm
What you need in addition:
-M5 nut
-M5 x 25 hex bolt
The M5 screw should have a length of at least 25mm.
Please share
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!