Adjustable Riser for (Macally) Laptop Stand

My dad asked for some feet to raise his laptop stand up to his eye level. He has a Macally laptop stand, looks like this one: https://macally-europe.com/astand

The bottom portion of the laptop stand is 35 mm wide, and 5mm thick. There is also a rubber pad underneath, around 1.5mm thick and 25 mm wide. These feet slide on to the legs, with a cutout to not interfere with the rubber pad.

The feet (part named Bolt) screw into the other part with an M18x2.5 thread. This adds a minimum additional height of 35mm, and can be unscrewed to increase this to around 55mm before it becomes unstable.

I recommend printing the Bracket part with supports only touching the buildplate, and the bolt without supports (my slicer tried to add supports in the thread otherwise).

Fusion 360 file is also uploaded, if you would like to modify the dimensions to fit another stand or change the height. Most parameters are defined in Fusion's parameter table, so it should be easy to modify.