Slicer Discord
Adjustable Shower Caddy – Modello 3D stampabile da MakerWorld MakerWorld
Organizers

Adjustable Shower Caddy

66 Download
31 Likes
11 Makes
Vai al Modello
Why: Got tired of various shower bottles being dropped on my feet. What: This is an adjustable shower caddy. The brackets hang on the rail/bar installed in most showers. The brackets have a screw at the back which can be tightened or loosened to achieve a level holding surface. The basket then has its top chord inserted into the channels at the top of the brackets while the leg of the brackets run underneath the basket. The basket is available in various sizes with and without curved corners. Whatever combination best suites your needs, you will need to print (2) brackets, (2) screws, and (1) basket. Printing Advice: I have included files for fit tests. These files are: Fit Test Main: This model represents the connecting sections of the bracket and should be printed only once without any horizontal expansion/X-Y compensation. The brackets should be printed with the same settings used to print this model.Fit Test Secondary: This model represents the top chord of the basket and should be
Categoria
Organizers
Fonte
MakerWorld
Pubblicato
Aggiornato
Cosa serve per stampare: Intermedio Bassa affidabilità
Pezzo unico Viteria richiesta
Supporti 1/3
Assemblaggio 0/3
Impostazioni 1/3
Dimensioni piano 0/3
Post-lavorazione 1/3
Stampante
FDM / FFF
Formato file
STL
Materiale
Post-elaborazione
Viteria
Software
Cura, PrusaSlicer o simile
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!

Modelli simili

5 Suggerimenti
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione