Adjustable shower head bracket

I have finished printing the model and installed, but I had to change the lever_skrew. Now everything fits great.

My bracket from the shower is broken ... such a crap. So get to CAD and rebuild. The result is quite successful and that's why I share it with you. You can print all Chrome parts with PLA / PETG / ABS, but the black part must be made of TPU / Flex filament. The best is TPU with the hardness 95a. In addition, you need a screw which is 20mm long and between 4 or 5 mm thick. The hole for the screw is in the CAD model 3mm large so that the screw fits tightly.
On picture 3, I have drawn the most important dimensions, if you want to print it, make sure that your shower head and the rod fits to the CAD Modell. My rod has a circumference of 70mm, because of the rubber part, it could also be slightly smaller or slightly thicker.

The shower head holder has a diameter of 25 mm
The middle part, without gum is 29 mm
The black rubber part is 23.5 mm
The screw for head holder 20