Adjustable Sim Racing pedal mount

I made a mount for my Fanatec CSL Elite Pedals, where I can adjust the angle, while mounted to a wooden base.Stuff I used:2x 2040 aluminum extrusion profile ~35 cm (can be wider or narrower, depending on your pedals, for the CSL Elite they can by narrower, minimum should be at least 25 cm, but I had the 35 cm ones here)16x M4x10mm, with same amount of T-nuts (I used https://www.thingiverse.com/thing:1061769) and hex nuts, for the mounting-plate, which holds the pedal holder on the extrusion4x M8x20mm (up to 25mm, for the CSL Elite Pedals), for mounting the pedals to the mounting-plate8x M8x40mm, with hex nuts, to mount it to the wooden bottom8x M6x20mm, to mount profile to the adapter (requires cutting 2 M6 threads per profile)4x M8x30mm, with hex nuts, also with 12x M8 washers, to mount the profile adapter to the front and back mount and adjust the angle of the pedalsThe front and back inner spacing is roughly 19.7 cm, best way to mark it is to loosen the outer M8 screws and flatten a