Thingiverse
Adjustable small cooling fan
von Polothil
2
Downloads
0
Likes
0
Makes
The exhaust fan used for this project is Rexnord REC 22038 A2 that works on 220V AC.
https://www.amazon.in/Rexnord-22038-Square-Exhaust-Inches/dp/B07RXB9SR8
https://www.electroncomponents.com/220v-AC-Fan-4inch
In this project, the fan is used for cooling purpose with 3D printed flexible handles to have freedom to adjust it's orientation to some extent.
M3 screws are used to fasten the joints. 2 x 35 mm long and 2 x 50 mm long screws were used.
Every part can be printed without any supports.
https://www.amazon.in/Rexnord-22038-Square-Exhaust-Inches/dp/B07RXB9SR8
https://www.electroncomponents.com/220v-AC-Fan-4inch
In this project, the fan is used for cooling purpose with 3D printed flexible handles to have freedom to adjust it's orientation to some extent.
M3 screws are used to fasten the joints. 2 x 35 mm long and 2 x 50 mm long screws were used.
Every part can be printed without any supports.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!