Adjustable wall hanger

This model allows you to hang what ever on a wall. This model is designed so that you can cut up a standard 25 mm clamping strap and adjust it. Instructions:Cut a 25 mm clamping strap to lenght. Around a 300 mm piece should be fine.Burn the cut ends so the strap doesn't fray.Allign the strap with the cut out in the wall piece.Secure to a wall with screws or bolts.Feed the strap through the locking piece as shown in the pictures.Hang, for example, an extension cord to the strap and insert the locking piece to the wall piece vertically.To lock it, twist the locking piece horizontally. Notes:The locking piece may not hold much weight when printed with PLA. I suppose ABS/ASA or PLA-CF would be better for this, but I currently don't have those filaments.The locking piece is tight to twist at first. It will loosen after a few turns.The cut out in the wall piece is currently 1 mm. A strap is usually a bit more than 1 mm, but it may need a washer so that the hole in the strap does not