Adjustable Window Limiter / Restrictor

Adjustable Window Limiter / RestrictorI had to replace the old window limiters, so I redesigned them in Onshape and printed all four parts with PETG. The print profile contains several plates with one specific part each: Adjustment Holder: This part need will hold the opening limiter (distance adjustment) part. It needs to be mounted to the window frame. Window-Bolt: This part will goes onto the window and will slide inside the opening limiter.Opening limiter: This is the large main part that allows the window to open in several equally spaced steps. There are two version: One shorter and one longer version. Both can be printed on the A1 mini.Pins: One pin per adjustment holder / opening limiter is needed to hold both parts together. You'll need several 4mm screws to screw the window-bolt to the window and the adjustment holder to the window frame. Be careful chosing the right length in order not to break your window's glass. Otherwise, the assembly should be pretty self-explan