Thingiverse
Electronics
Vai al Modello
ADS-B Cantenna
71
Download
44
Likes
0
Makes
Window mount and jigs for building an ADS-B 1090MHz Cantenna for use with [PiAware](https://flightaware.com/adsb/) and other ADS-B receivers.
I included printable jigs to find the can center and to cut the can and vertical element to the proper length.
This model is designed for 68.75mm (1090MHz quarter wavelength) elements. This can be adjusted slightly by scaling only the horizontal axis.
Inspired by the following cantenna articles:
[FlightAware Forum Post](https://discussions.flightaware.com/t/three-easy-diy-antennas-for-beginners/16348/3), by abcd5670
[Hackaday Article](https://hackaday.com/2018/01/23/an-ads-b-antenna-built-from-actual-garbage/), by Tom Nardi
I included printable jigs to find the can center and to cut the can and vertical element to the proper length.
This model is designed for 68.75mm (1090MHz quarter wavelength) elements. This can be adjusted slightly by scaling only the horizontal axis.
Inspired by the following cantenna articles:
[FlightAware Forum Post](https://discussions.flightaware.com/t/three-easy-diy-antennas-for-beginners/16348/3), by abcd5670
[Hackaday Article](https://hackaday.com/2018/01/23/an-ads-b-antenna-built-from-actual-garbage/), by Tom Nardi
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
