Thingiverse
Adventurer 5M Cable Guide
by syk-zero
3
Downloads
10
Likes
0
Makes
Cable guide for LED wire along RHS of frame
I bought this LED light Strip from AliExpress
https://www.aliexpress.com/item/1005008133471167.html?spm=a2g0o.order_list.order_list_main.41.3c68180212kJKm
Held in place with 6x2mm magnets glued in
Slot is narrow on purpose, need to pry open slightly to slip cable in (mod if you don't like :-) )
Plenty of room for more cable if required.
Required:
2 of FlashForge 5m Stuff-Cable Clip A 100mm.stl
1 of FlashForge 5m Stuff-Cable Clip A 95mm.stl (includes cut out for frame and screws)
6 of 6mmx2mm magnets
Prints vertically without support
I bought this LED light Strip from AliExpress
https://www.aliexpress.com/item/1005008133471167.html?spm=a2g0o.order_list.order_list_main.41.3c68180212kJKm
Held in place with 6x2mm magnets glued in
Slot is narrow on purpose, need to pry open slightly to slip cable in (mod if you don't like :-) )
Plenty of room for more cable if required.
Required:
2 of FlashForge 5m Stuff-Cable Clip A 100mm.stl
1 of FlashForge 5m Stuff-Cable Clip A 95mm.stl (includes cut out for frame and screws)
6 of 6mmx2mm magnets
Prints vertically without support
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
