AeonFlux - Hueforge

Hueforge of AeonFluxThe photos shows the result in 200*149 and a nozzle of 0.4You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLAHueforge descriptionPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 148.95x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.5mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Jade White Transmission Distance: 5PLA BambuLab Basic Red Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #6 (0.56mm) swap to Blue GrayAt layer #10 (0.88mm) swap to Jade WhiteAt layer #14 (1.2mm) swap to Red for the rest.