Thingiverse
Aggressive Inline Skate Stand
par j5live
21
Téléchargements
12
Likes
0
Makes
Inline Skate Stand designed for storing and displaying aggressive skates on a self or table. I couldn't find any nice display mounts that were inexpensive so I took an hour and designed these. They worked out better than I had hoped.
You can basically print this with anything. I used OpenScad to do the design and LulzBot Cura to slice. Provided is the scad file if you wish to customize.
This particular print is setup for 50/50 balance frames with 58mm wheels. It should fit up to 60mm. Above that you will want to modify mounting 'rail' to be larger so it makes contact with the frontside grove of the frames. The thin base is left on purpose to provide more friction when displayed on a slightly slating surface.
This is for one skate. Print two to mount a complete skate set.
You can basically print this with anything. I used OpenScad to do the design and LulzBot Cura to slice. Provided is the scad file if you wish to customize.
This particular print is setup for 50/50 balance frames with 58mm wheels. It should fit up to 60mm. Above that you will want to modify mounting 'rail' to be larger so it makes contact with the frontside grove of the frames. The thin base is left on purpose to provide more friction when displayed on a slightly slating surface.
This is for one skate. Print two to mount a complete skate set.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !