AIO MANTIS

Please note this is only compatible with LGX Lite, HF Rapido, 5015 blower, 3010 Axial fan, MGN12H, Magprobe or TL Q5MC2. Feel free to modify or use what you need. AIO Mantis is a remix of the dual 5015 blower Mantis Toolhead. The motivation is about implementing some useful features, LEDs, can-bus and sometime in the future a Nozzle cam! With macro lens camera module and extra light for picture quality. Features : Filament Sensor 4x WS2812 Led's (I glued mine) FLY-SHT36 V1 Mount Front can-bus cable connector Magprobe Enhanced fastening on extruder and TH/Carriage joint (I recommend PC-CF) (For Magprobe, if you are sceptic about D2F, you can use Honeywell 411 SX21-T) Working on: Nozzle Cam + 4x WS2812 Camera module usb-c port Current problem with camera module: The module heat a lot, the image obscure with time. Exploring active-cooling solutions. (update: I experienced nozzle cam and lost interest since not usable unless going slow...) USB Camera Module 100° 2.8mm Lens (need to select 20mm Focus) found on ali https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Long/Mantis_Dual_5015 https://github.com/Mellow-3D/Klipper-CAN-Toolboards https://github.com/Annex-Engineering/Quickdraw_Probe