Air65 Hovercraft

This is my Air65 Hovercraft. To set it up in Betaflight you only have to set up a custom Mixer. It is great fun to drift around and a good way to reuse broken Matrix 5in1 boards. Have fun building it! Print settings: 0.2 mm Nozzle20% InfillPLA or PETG with Standart Temps2 Wall layers Custom Mixer CLI Commands: Copy & Paste these in the CLI shell in Betaflight 4.5 or newer. set p_pitch = 0set i_pitch = 0set d_pitch = 0set p_roll = 0set i_roll = 0set d_roll = 0set p_yaw = 0set i_yaw = 0set d_yaw = 0 set airmode_start_throttle = 2000set iterm_relax = OFF mixer CUSTOMmmix resetmmix 0 1.0 0.0 0.0 0.0 mmix 1 0.001 0.0 0.0 0.0 mmix 2 0.001 0.6 -0.6 0.0 mmix 3 0.001 0.6 0.6 0.0 save Assembly: All parts just need to be screwed down or press fitted in. You can glue down the cam or dont use it at all. By adjusting values in the Mixer you can change speed and responsiveness. Feel free to ask questions and leave tips in the comments. If you think its good, please like this model!