Thingiverse
Airbrush Station
di scifiguy
4.7k
Download
3.6k
Likes
12
Makes
This is an airbrush stand and cleaning station that uses Ball brand wide mouth canning jars (the 16oz model is shown in the pictures). It was designed for the SOTAR 20/20, but might fit other airbrushes as well. You can print the included test file to check fit of your airbrush before committing the time and filament (or resin) needed to print the whole thing.
Features:
1. Great fit and positive lock on the SOTAR 20/20 airbrush.
2. You can flush out the airbrush by purging it while seated in the holder.
3. There is a conical washout funnel section for emptying and rinsing your airbrush paint cup.
4. The washout funnel has a discharge tube that prevents spray backflow from getting out the funnel (water level in the jar needs to be at least 1cm).
5. There is also a filter section with cap--load with cotton to prevent discharge of atomized paint when purging the airbrush.
6. For added convenience, you can mount the included cotton swab holder to the side for easy access when
Features:
1. Great fit and positive lock on the SOTAR 20/20 airbrush.
2. You can flush out the airbrush by purging it while seated in the holder.
3. There is a conical washout funnel section for emptying and rinsing your airbrush paint cup.
4. The washout funnel has a discharge tube that prevents spray backflow from getting out the funnel (water level in the jar needs to be at least 1cm).
5. There is also a filter section with cap--load with cotton to prevent discharge of atomized paint when purging the airbrush.
6. For added convenience, you can mount the included cotton swab holder to the side for easy access when
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
