Airbus A320 Lightning Panel

Introduction This is my first proper panel with a custom PCB and is how I plan on making them in the future. The panel is a 1:1 scale as the real life panel designed with 10mm clearence on either edges to mount on to the pedestal. The panel consists of three separate panels that are mounted together with two M3 screws. The PCB also gets mounted on the same screws from underneath and has a 5 pin JST-XH connector to wire to an external microcontroller for simplicity. In the future when I make my other panels I will include a port to connect this panel to, so stay tuned! Parts needed PCB: 11x 3mm flat top warm white LEDs - https://www.aliexpress.com/item/32281183062.html 2x vertical mounted 10K RK097 potentiometers - https://www.aliexpress.com/item/1005009717287004.html 1x standard 1K resistor 1x Bourns 3296W potentiometer trimmer or similar, 50K - https://www.aliexpress.com/item/1005002633262032.html 1x 5 pin JST-XH connector, I recommend buying a set of different pins - https://www.alie