Airforce plane

This model is from an old vintage Airforce sign. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.96mmThe Max Depth is 2.7mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic BambuLab Green Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Red At layer #13 (1.12mm) swap to Black At layer #19 (1.6mm) swap to BambuLab Green At layer #20 (1.68mm) swap to Jade White for the rest.